Case Ingersoll C25042, C20566; John Deere AM39687; Kohler 277233. Fleetguard, Onan 122-800, 122-0469 Longer, high-capacity alternative to Onan 122-0645, Case Ingersoll C26191 and Cub Cadet ME-122-0645 where clearance permits. 

TWO PACK KIT Includes, (2) GENUINE ONAN FLEETGUARD 122-0800 Filters. These are high-capacity filters for increased oil filtration and capacity that help with engine cooling as well as engine life.

For the STANDARD version of this filter CLICK HERE 

Be careful there are lots of counterfeit Fleetguard/Onan filters out there sold all over that are very poor quality. These are the real deal.

Case Ingersoll: Onan-powered 226, 446, 448, 3016, 3018, 3020, 4016, 4018, 4020, 6018

WARNING ALWAYS make sure you install the reusable "oil filter grommet" on every oil filter. It seals the outside of the filter to the heat tins. If it is missed, lack of engine cooling will happen and catastrophic engine failure is very possible!

OPTION- To add our Standard or DELUXE versions grommet Always change your engine oil AND filters every 25 hours! NOTE- These filters are high capacity and in turn are longer always check clearance with loaders and attachment arms etc. We have not had any issues with any machines with these filters but being longer it can be a possibility. 

These are too long for most John Deere 316, 318, 320, 420 Use the OEM Standard Filter here 122-0645 Note- Packaging may very

FILTER SPECIFICATIONS - FLEETGUARD Type: Full-flow, spin-on engine oil filter. Thread: 3/4-16 UNF-2B. Overall height: 4.58 inches Maximum outside diameter: 3.06 inches Seam outside diameter: 3.06 inches Sealing gasket outside diameter: 2.83 inches  Sealing gasket inside diameter:2.46 inches Anti-drainback valve: Yes. Bypass valve opening differential:8 PSI. Rated flow: 6.08 GPM  Minimum burst pressure: 203 PSI Manufacturer-listed particle efficiency: 68 percent at 24.6 microns OEM AND SERVICE PART-NUMBER REFERENCES OEM AND SERVICE PART-NUMBER REFERENCESCummins Onan: 122-0800, 122-0323, 122-0445, 122-0468, 122-0469, 122-0608, 122-0680, 122A323, 122B323Fleetguard: LF3339Case Ingersoll: C25042, C20566John Deere: AM39687, AM34770, HE1220323, HE1220445, HE1220800, 111016Kohler: 277233, 277233-SBobcat: 6511793, 6512143, 6647672Melroe / Clark Equipment: 6512143, 6647672Case IH: 3147441, 3147441R92, 507107, 507631Caterpillar: 3I1303, 9Y4459Ditch Witch: 155-938Gehl: 600287, 83715New Holland: 507107, 507631Kubota: 15152-32090, 15192-32090, 15212-32090, 15213-32090, 15213-32091, 15213-32430, 15246-32430, 70000-14672, 70000-32431JCB: 2/630795A, 2630795ALiebherr: 7616297Stens: 120-626Toro: 108-3817, 277233, 57-8530, FL-400ALONGER ALTERNATIVE TO SHORT-FILTER APPLICATIONSOnan: 122-0645Case Ingersoll: C26191Cub Cadet / MTD: ME-122-0645John Deere: AM101207 on selected Onan-powered applicationsFleetguard: LF3335, LF3338Baldwin: BT223Donaldson: P550335Fram: PH3614Luber-finer: PH2835WIX: 51348These are short-filter application references, not identical-size filters. Confirm engine specification, mounting arrangement, cooling-air seal and available clearance before using the longer filter.OTHER LONG-FILTER CROSS REFERENCESBaldwin: B243, B7020Donaldson: P550400Fram: PH3600Luber-finer: PH400WIX: 51516NAPA: 1516Motorcraft: FL-400SPurolator: L20195Bosch: 3422K&N: HP-2009Hastings: LF134Pennzoil: PZ-19STP: S3600Valvoline: VO-23Fleetrite: LFR-83339Rotary: 22078SF-Filter: SP 4521Onan 122-0469 has a hex removal feature. This kit does not have the hex feature.SELECT ONAN ENGINE APPLICATIONSB43, B43E, B43G, B43MB48, B48G, B48MP216G, P218G, P220G, P224G Performer enginesCCK, CCKA, CCKBSelected NH, NHE, NHEL, NHMAdditional engine references: B, BF, BM, BE, BG, NA, NHB, NHC, NHP, N52M, P216, P218, P220, P224, T260Some versions use the shorter filter, and the longer filter requires sufficient clearance.GARDEN TRACTOR AND MOWER APPLICATIONSCase Ingersoll: Onan-powered 226, 446, 448, 3016, 3018, 3020, 4016, 4018, 4020 and 6018 tractors.John Deere: 400 tractor using AM39687. Selected Onan-powered 318 and 420 tractors using AM101207 are possible longer-filter applications where clearance and seal fit permit.Cub Cadet: Onan-powered 982, 984, 986 and 1914 tractors using ME-122-0645 are possible longer-filter applications. Verify clearance and cooling-air seal fit. For a 1912, confirm the original engine filter number.Allis-Chalmers: 616, 620 and 720 garden tractors with the applicable filter-equipped engine.Toro: Groundsmaster 220 and HydroJect / Hydro-Ject 3000 applications listed for LF3339. Hydro-Ject 4000 with Onan engine is also cataloged in the P550400 cross-reference family. D-160 and D-200 Automatic Tractors.TORO / WHEEL HORSE ONAN APPLICATIONSSelected 416-8, 416-H, 516-H, 518-H, 520-H, 520-HC, 616-Z, 620-Z and 724-Z models are possible applications with the matching Onan engine. Check the exact model, serial number, original filter requirement and clearance.Toro service references: NN10143, 137-5012OLDER ONAN GENERATOR APPLICATIONSThe Cummins parts guide specifies 122-0800 for:Emerald NHE: Specs A-E, F as identified in the guide, G, H and J-PEmerald NHEL: Specs A-EMarquis NHM gasoline: Specs A-F and G-HMarquis NHM LP: All specs covered by the guideCCK Mobile / RV: Specs A-Q, R-UNH Power Drawer: Spec ANH Power Drawer 9000: Specs A-HNH RV: Specs A-H, J-N and P-RNHL: Spec PNHEL Spec F and BGE / BGM may specify the shorter filter. Confirm the model and spec letter rather than ordering by the Emerald or Marquis name alone.LOADERS, SKID STEERS AND OTHER EQUIPMENTNew Holland: L120, L250, L325, L454, L464, LS120. Cataloged engine versions include Onan for L250, Ford VSG411 for L454 and Ford VSG413 for L464.Gehl: HL-2500, HL-2500A, HL-2600, HL-3000, HL-3200, HL-4500, SL-3310, SL-3510, SL-3515, SL-3725, SL-4510, SL-4515, SL-4525. HL-2500, HL-2500A, HL-2600, HL-3000 Hydrocat and HL-3200 Hydrocat include Onan-powered applications. Confirm the cataloged engine version.Bobcat: 520, 530, 540, 542B, 600, 610, 611, 621, 631, 641, 721 and 731 Skid Steers; 741 Loader; F2L411 and F2L511 engine applications.Mustang / Owatonna: 330, 332Hydra-Mac: 10, 12CBadger: Bucky with Onan engineGenie: Z45, Z45/25; cataloged Z45/25 application with Ford engineAusa: CHG150 with Ford VSG413Tennant: 86 with Kohler K482Oakes: L600Thermo King: XMDCase / International Harvester: 360 TrencherCaterpillar: AP200 Asphalt PaverDeutz: BF4L1011, BF4M1011, F1L411, F1L511, F2L1011, F2L411, F2L511, F2L511D, F2M1011, F3L1011, F3M1011, F4L1011, F4M1011 diesel enginesDitch Witch: 255SX, VP12JCB: 160, 160HF, 170, 170HF Robot Skid SteersJLG: 40-RTSKohler: K482-K582 enginesKubota: L175, L185DT, L185F, L200, L210, L225, L225DT, L225FA, L245DT, L245F, L245H, L260P, L295DT, L295F, L305DT, L305FLandini: 65 and 85 Climber; 65 and 85 MultitracLiebherr: L504, L506, L507, L508, L509 LoadersValtra-Valmet: 3100Vermeer: LM-20Volvo: L30B, L32B, L35B 5:47 PM