NEE0186-K - Onan 'BG' Series Master Tune Up/Decarbon/Valve Adj With Oil Filter. The Onan B43G, B48G, These engines were used in many different brands of equipment like John Deere, Wheel Horse, Cub Cadet, Toro, Miller, etc. FOR ONAN B "G" SERIES ENGINE B43G OR B48G
BG-NOT A FACTORY engine model for Case Ingersoll FREE SHIPPING
Look at our listings for Onan BF, BM, and P Series engines. For Case Ingersoll and others
(Note: some extremely late model years of these tractors do NOT have points and those models would use an Onan P series Performer kit <CLICK
IF YOU HAVE ONAN BF, BM, B43M, B48M THEN LOOK FOR OUR OTHER LISTINGS BF HERE, BM HERE most Case Ingersoll Onan Tractors
Onan 'B' Series Master Tune Up/Decarbon/Valve Adjustment, Ignition and Filter Kit, Comes with the gaskets needed to do a decarbon and valve adjustment job. Included will be high-quality USA made to our specs, 2 intake gaskets, 2 valve cover gaskets, Carb to intake gasket and adapter to carb gasket, points gasket, And two very high-quality aftermarket head gaskets or (you will have the option for OEM), 1 aftermarket condenser. High-quality aftermarket set of points, also includes high-capacity fuel filter, 2 top-quality NGK spark plugs, high-quality air filter and pre filter. Comes with Standard Capacity OEM Oil Filter 122-0645, AM101207, In our kits we also include a carburetor gasket for the halves so you can clean your carb too. Nikki Style carb choose "early" or "late" for gasket (look at photos)
NOTE- The Included STANDARD Capacity oil filter Clears John Deere 316, 318, 420 side engine cover panels where high capacity filter will not most times (NOTE high capacity is Photoed, but Standard is what is included for this kit) You can Choose High Capacity in the OPTIONS but clearance and fitment is on the buyer to check before ordering.
We have tried many aftermarket points manufactures and options, and these by far we have seen the best results with and are far more economical than the expensive OEM option.
Current OEM points are NO longer the superior quality "Repco" points but they are good quality, OEM points are an OPTION upgrade to them.
(WE do have a small supply of REPCO points and OEM condensers for sale listed separately, note they are no cheap and very, very hard to find but we are offer a limited amount to those who want them)
Do not forget the gasket maker/sealer HERE
SELECT AT CHECK OUT Carb Style
OPTION- to choose Onan OEM head gaskets at check out.
OPTION- add the grommet for the oil filter. It is a needed piece to keep your engine properly cooled and avoid catastrophic engine damage. It is an oil filter to tin/heat shield grommet. If you do not have one or yours is damaged it is a MUST HAVE item on your Onan. OEM GROMMETS are not available but we have sourced a replacement that will function in place ON OEM OIL Filters can not state compatibility with non OEM filters.
OPTION- Choose STANDARD or HIGH Capacity OIL Filter CHECK clearance before ordering high capacity!
CHOOSE- Carburetor You Have Nikki Early, Nikki Late LOOK at Photos.
Acell spark plug wires have been out of stock for over a year, but we have found a great replacement of the same quality or better quality.
It is recommended and extremely important that all Onan engines get decarboned at every 250-500 hours. Depending on engine use, oil consumption, operating engine temperature, carburetor adjustments and spark plugs, if you did not have good hot complete combustion, burning lots of oil, or rich running condition your carbon buildup can happen much faster. Not de-carboning or adjusting valves can lead to catastrophic engine failure, lower performance, and lower fuel economy.
This kit includes what you need to do your routine seasonal maintenance, tune-ups, and major tune-up/decarbon/valve adjustments. This is what we use in our shop. The OEM oil filter, The spark plug heat range we select here for our kit we have found works best with today's gasoline. The OEM-owned fleetguard filter brand is the number-one filter company in the world. This kit is what you need to make your Onan "BG" series run like new and stay that way. (Kit will work on most brands of tractors that have 'B' "G"series engines B43G B48G)
Be sure to watch our videos on how to adjust values and decarbon Onan engines.
Video Links:
How to De-carbon & Replace Head Gaskets On A Onan or Many Small Engines. DO BEFORE ADJUSTING VALVES
How to Adjust the valves on a ONAN Small Engine
SHOP TIP: We recommend always running high octane, premium gas in ALL small engines and Case Ingersoll machines, and even better if you can get ethanol free. We have found a noticeable difference in performance and reliability/issues
SPARK PLUG GAP .025 - .030
Valve Adjustment Clearances: .005-.008 on intake; .012-.014 on exhaust are the clearances we use
POINT GAP: .021 for BM Series. John Deere calls for .16 for some speced engines BUT WE HIGHLY RECOMMEND timing the engine and setting the points with either a test light or using the timing gun method and your manual for your model. CLICK here to get to our video on this.
































Reviews
great service i will call again thanks for the order!