C23740, C29937 PTO Clutch Friction Disk Replacement UPGRADE. Made right here to our specs this disk is harder than the most recent disk offered by OEM, has quality modern metallic and friction fiber mix of materials, slots cut in rear for adhesion. But not only those improvements with this Case Ingersoll Northeast Product you do NOT have to bake it in your wife’s oven in order to install like the non availble OEM ones, not only no funny tastes and smells in your house, more important you do not have to deal with hot toxic fumes in your house!
To install our disk you simply have to prep disk and pulley face some 60-80 grit sand papper or flap disk/cookie wheel etc. Very light prep is needed to give the epoxy a rougher surface to stick to, then some alchol or cleaner in your shop to remove dust oils etc, then apply a quality epoxy bonding product and clamp in a vice or similar between to pieces of wood or metal for 12 hours at least but follow the product you are using recommendations for mixing, prep, install and curing instructions. Use proper personal Saftey Equipment and practices.
OPTION- To Switch to our recommended Full PTO Refresh kit that includes this disk, Bearings, Spring Washer & Spacers.
OPTION- To include 2 part bonding product for install.
LOOK For our other Upgraded PTO parts like Bellville Spring Washers, Cam bearing retainers, EZ Adjust nut set, fan and more listing!
