This is kit style #3:  complete plug-and-play "Selector valve" install kit designed for Case Ingersoll tractors ALREADY equipped with three-point hitches. The three-point hitch is NOT included

WHAT DO OUR SELECTOR VALVE KITS DO AND ARE USED FOR? THEY
LET YOU INDEPENDENTLY OPERATE YOUR 3-POINT HITCH FROM YOUR
MID/FRONT LIFT HYDRAULICS! WE VERY HIGHLY RECOMMEND THIS
ON ANY AND ALL TRACTORS EQUIPPED WITH 3-POINT HITCHES.
A MUST-HAVE SO YOU CAN USE BOTH REAR AND FRONT/MID-MOUNTED ATTACHMENTS INDEPENDENTLY!

This is Style #3 of two different kit styles we offer based on desired valve and hose routing locations. On this style kit, the selector valve and all hoses are mounted and concealed under the operator's platform for later model 200 and 400 series tractors with "full fenders and full operator floor and platform" (like in photos) as well as for most 3000 and 4000 series tractors and some loaders.

But for plug-and-play on older 200 and 400 series tractors, we recommend our STYLE #1 kit. Please look at ALL both kits to be sure you are getting the style needed for your tractor.


Lift the rear attachments when you want and the front or mid attachments when you want instead of both at the same time. Lifting both at the same time without a selector valve is unproductive, frustrating as well as dangerous.

This style #3 of the styles we offer, again be sure to look at both to see which one will work best for you! ALL of our kits are designed specifically for Case Ingersoll Garden tractors but can work on other brands but fitment is not guaranteed and it is up to all buyers to look at the photos, and info and to do research before buying.

Look where the hoses and valve is located on in EACH different kit and see if you have room to mount the valve and run the hoses where they need to be for each style kit. It is up to you to pick the correct kit for YOUR tractor as they all vary to some degree.

Our kits are plug-and-play, very simple installs with basic tools and skills.
 
Our kits are made of top-quality parts, no hacking or cutting of the tractor is necessary to install. Nor are there many extra fittings or adapters used like in other kits we have encountered where they make the hoses cheaper to save money and create many more connections with adapters that could leak.  Depending on what kit number of ours only 2 or 3 holes have to be drilled to end up with a clean professional look that will last a very long time.  

All of OUR hoses have expensive swivels on BOTH ends for ease of installation and
maintenance. Also, with swivels on both ends and the correct expensive hose ends on our hoses there is no need for extra adapters on the selector valve. In most cases, the other end of the hose thread right onto your existing tractor fittings. All our fittings are quality fittings/hoses ends are made for high hydraulic pressure, NO cheap dangerous pipe fittings here. The hoses are all high quality very flexible high PSI R16 hydraulic hoses and ends.

All kits Include one high-quality selector valve, and three high-quality 1/4" hoses made to length for each particular kit install. A cap fitting for the TCV "TEE", a 45-degree and a straight fitting that MAY need to be used depending on how your tractor already is set up. Also included is all necessary grade 8 hardware, basic hose protection for exposed portions of the hose as well as zip ties for mounting and securing hoses and hose protection.

Basic guidelines and photos for installation are also included. It is up to the buyer to choose the properly qualified person to safely install the kit. Only very basic tools are needed, most installs only require 1/2, 9/16, 5/8, 11/16, 3/4 wrenches. And possibly basic internal hex-style Allen wrenches or sockets to remove plugs in the Selector valve.  Most installs take around 30-90 mins depending on skill.

NOTE: Selector Valve Kits can be used for adding additional or auxiliary hydraulic circuits or cylinders, for example, use of dump carts, angle front plow dozer blades, front grapple on bucket loaders, etc.
 
We also offer a three point hitch hose kit, this will be offered as an option at check out - if you would like more details on the three point hitch kit click HERE to get to the listing in our store with full details. When you get the three point kit option with the selector valve there is no bottom cylinder hose in the three point add on kit because you are already getting  a custom bottom hose included in the selector valve kit.  Three point add on option at check out price reflects this.