Case Ingersoll Snow Caster Bearing Kit and Chain FOR 19 tooth OR 16 TOOTH jack shaft sprocket. Includes two C28971 bearings,  C46469 OR C18183 chain and half link and master link. Choose chain/sprocket count you have.
 
This kit is for later model CaseIngersoll snow blowers with the Included two ROUND bearings, replaces part number C28971, C70280 .  The chain Options in this kit are C18183 for older Blowers with 16 tooth sprockets on jack shafts OR C46469 is for later Model Ingersoll Snow Blowers,  SB38G, SB38, SB48  (used on later 3000/4000 series tractors).   OR Those that UPGRADED older snowthrowers to the 19 tooth sprocket on your older J80/84, K80/84, L80/84, M80/84,N80/84,P80/84,R80/84,S80/84 and some SB38 SB48 snow caster augers model blowers WITH "ROUND" AUGER bearings. 
 
OPTION- Add two new stub support shafts C25841 for these C28971 ROUND bearings.
OPTION- Add two new C25840 bearing sleeves for these ROUND auger bearings. Often these can get damaged when removing bearings. 
LOOK AT PHOTOS FOR WHAT BLOWERS THIS KIT WORKS WITH. Count your sprocket teeth and pull AUGER bearings to verify style. 
 
If you have *"HEX"* auger bearings then click HERE
 
These bearings are for the round shaft and round stub shaft ONLY, THESE ARE NOT HEX BEARINGS, hex bearings are used on many snow casters. If you have HEX bearings, CLICK HERE to get to the correct kit for your snowcaster. 
 
NOTE: Check your parts manual.  A best practice is to pull your bearings before ordering so you know what bearings you have.  Some blowers may have had the original style bearings replaced with newer or older style bearings. Count your sprocket teeth to verify chain neeed.
 
Also check out all our other snowblower kits. Mule Drive pulley kit, Jackshaft rebuild kits and more!
Be sure to watch our Snowblower videos for installation instructions and tips. Auger Bearing Replacement Video HERE