top of page

TWO C25580 Pivot Bushing sleeves are included, as well as new upgraded hardware, to do a complete job right the first time. Save time with our kit!

 

This bushing kit is for later snow throwers Snowcaster pivot to mounting frame # C25565

Look at photos of bushings to see if these are the ones you need. Used on blower models M80, M84, N80, N84, P80, P84, R80, R84, S80, S84 and SB38, SB48 & variant's.

Or ONLY if your older G, H, J, K, or L models had the newer C25565 bracket as a replacement

for mule bracket.

 

FOR Models G, H, J, K, L Snowcasters with original mounting mule frame bracket

models order C18770

 

The bushings are often overlooked or not known about. If your blower does not lift as high as it should, has right and left or fore and aft movement and play it is a great possibilty that these bushing are worn or often missing! We include new grade 8 bolts as well. Most times, if the bushings are worn, the bolts are too, and no sense just replacing bushings if the bolts are not true. There are many mounting and points of contact that can ware on your blower to cause play and not lifting to full height or operation issues. But these bushing and bolts are often the major cause and first parts we recommend replacing.

 

OPTION- We highly recommend adding our full mule drive rebuild kit that includes 2 new pulleys, Spring, Arm Bushing and new hardware for a complete lasting repair. Save Time And Money with this full kit addition! For more info on this Snowcaster mule drive rebuild kit, check out our listing for it.

 

Do not forget your new belt as well! And all of our multiple snow blower kits and options!

 

**LOOK FOR OUR VIDEO for installation for this and many repairs on our YouTube channel Case Ingersoll Tractors Northeast HERE.

C25580 Pivot Bushing Kit for Mule Drive Later Snowblowers Case Ingersoll

PriceFrom $45.00

    RELATED PRODUCTS