Case Ingersoll Snow Caster Bearing Kit.  Includes two  Replacment bearings for part numbers C28971, 70280, A70280, C70280. Make sure these are the correct ROUND AUGER bearings you have before ordering.
 
OPTION- Add two new stub support shafts C25841 for these C28971 ROUND bearings.
OPTION- Add two new C25840   bearing sleeves for these ROUND auger bearings. Often these can get damaged when removing bearings.  LOOK AT PHOTOS FOR WHAT BLOWERS THIS KIT WORKS WITH.  Pull bearings to verify style. 
 
This Kit is For later model snow blowers.  Includes two bearings,  replaces part numbers C70280, C28971. Used on M80/84,N80/84,P80/84,R80/84,S80/84  (used on many 200 & 400 series tractors.) And used on SB38G, SB38 and SB48 (used on the 3000/4000 series tractors) for snow caster augers.
 
These C28971 bearings are for the round shaft and round stub shaft on AUGER ONLY, THESE ARE NOT HEX BEARINGS, hex bearings are used on many early snow casters.  IF you have HEX bearings CLICK HERE to get to  the correct kit for your snowcaster.  
 
Check your parts manual. A best practice is to pull your AUGER bearings before ordering so you know what bearings you have. Some blowers may have had the original style bearings replaced with newer or older style bearings best to check first. 
 
Also check out all our other snowblower kits. Mule Drive pulley kit, Jackshaft rebuild kits and more!
Be sure to watch our Snowblower videos for installation instructions and tips. Auger Bearing Replacement Video HERE