NEE143CK Case Ingersoll C29959, 149-1982, 149 2501 Onan Fuel Pump UPGRADE Conversion Custom KIT NEE143CK Fuel Pump Upgrade Conversion Custom Kit For ONAN "P" Performer AND Nikki/Walboro Carburetor equipped Late "B" Model Onans.  If you have a square "DD" Model carb with the fuel pump on front of carb then you need our NEE145CK Kit Click HERE
 
This complete kit Works on many brands of equipment, tractors, mowers, generator etc. NOT just Case Ingersoll  models. Will work as a fuel pump on many models and brands of engines and equipment.
This custom upgrade kit works to replace the original vacuum/pulse pump
  NOTE- MUST choose what engine model you have to get correct upgrade kit. B or P
 
PART NUMBERS THIS KIT MAY REPLACE- C29959, 149 1911, 149 2501, 149 149 1322, HE149 1982. Works on most ENGINE Model Performer, P216, P218, P220, B43M, B48M, B43G, B48G NON DD Carb Engines and others
 
We put this custom kit together to solve a very common and frustrating issue for thousands and thousands of ONAN B/P Engine owners that cant find a reliable fuel pump. This is a cost effective quality and lasting solution we have in this kit with all you need to do the change over to a reliable fuel pump on your Onan and other engines. The OEM  fuel pumps or Very hard as they are not made anymore and are priced crazy, depending on model $200 to $400 for one!  We have searched and tried countless aftermarket options, even from quality and trusted suppliers and have not found 1 suitable and reliable alternative. Many aftermarket parts can work well and save money  AFTERMARKET FUEL PUMPS ARE NOT ONE!! They are garbage and total waste of money and fail very fast. It does not matter if you get a $20 or $200 aftermarket fuel pump we have not found one that’s worth a darn. That is the reason we put this complete custom kit together for you.
 
It is a very fast and simple install, basically plug and play with high quality components! We have the adapter plate (for "P" Engines)  that is custom made here and in the USA. Top Quality Pulse Pump used on many OEM engines, quality fuel hoses and clamps. Nice Black hardware that gives a couple options to fasten pump and a  brass fitting ( For "P" Models).
 
OPTION- to add our high quality high capacity inline fuel filter we highly recommend doing this.
 
INSTRUCTIONS. For "P Perfomer Modles" Simply remove your old pump,  Hook current vacuum line (or replace line if needed) to back of our adapter plate brass fitting with spring clamps. Install our adapter plate with fitting in place of old pump.
Find a suitable location to mount Our new pulse pump, Best to keep it away from extreme heat and exhaust. You can mount to flywheel blower housing shroud, other parts of engine, tractor firewall, dash tower, frame etc. We provide screws that will thread in some holes on the engine and or tractor as well as self drilling screws so you can place the pump where you want. There are 3 ports on the new pump, IN and OUT have SMALL arrows and the pulse/vacuum from our adapter plate goes to the outer/center fitting of pump. IN comes from the fuel tank and the OUT goes to your carburetor. 
 
Use hose clamps on all hoses and make sure to use a inline fuel filter, ideally before pump to protect it. The pump can push or pull so it can be mounted a different heights but ideally within 6 inches higher or lower than the carb. But will work fine mounted higher or lower than 6 inches just will make the pump work harder. If possible higher than the vacuum line fitting on engine will help oil mist drain back into engine and not pump, but NOT a must.
NOTE- Keep fuel lines secure and away from heat or moving parts, if running line through flywheel housing make sure its clear of flywheel and ran correctly and using the hose retainers INSIDE blower housing.
 
WATCH OUR VIDEO ON THE Onan P/B Fuel Pump Conversion UPGRADE KIT.  CLICK HERE