LOOK AT PHOTOS FOR CORRECT MULE DRIVE STYLE!
Includes- TWO C24182 , FOUR C16573 And TWO C17597  included and TWO Cotter Pins
 
For all  "K48, L48, M48 AND RM60" 60 INCH ONLY Mower Decks. These were the very second generation 60" mower decks used on 444, 446 and 448 models and 60 inch decks used on 4016, 4018, 4020, 4021, 4023, 4118, 4120 and 4200 series tractors. All Right and Left discharge decks BESIDES "J48"  THERE WERE 2 STYLE MULE DRIVE BRACKETS USED ON LEFT DISCHARGE DECKS *LOOK AT PHOTOS of the mule drive used with this kit* to be sure you order the correct kit! We have the early style J48 60 inch deck bushing kit listed as well. We also have bushing kits for all other decks.
 
This kit is very important and often over looked. If your mower deck is not lifting as high as you think it should, is not mowing as nice as it should, not floating or riding as it should, not siting level, belt throwing or wearing issues then there is a very good chance your mower mule drive and deck carriage bushings need replacing.
Also inspect all your mounting bolts and pins for any wear and replace as needed as well as the steel mule drive itself and lift brackets, links, pins etc.
We also highly suggest replacing your deck wheels and shoulder bolts as they have a great effect on mower lift and performance. We have an option at check out to add  rear deck wheels and front deck wheels. Also we recommend adding new shoulder bolts as well.
 
NOTE- Some minor material removal may be needed on some bushings in some instances, most times a file or sand paper will do the trick,  if  any material is needed to be removed it is often a very little amount.
 
Watch our video on mower mule drive and carriage rebuilds.   *HERE*
Be sure to check out our mower deck rebuild master kits and our refresh kits.